115+ Wooden Floating Nightstand With Drawer

www.etsy.com

Introduction: Adding Elegance and Functionality to Your Bedroom Creating a floating nightstand with a drawer offers a sleek, modern look while maximizing space in your bedroom. This DIY project provides both storage and a unique design element that complements various decor styles. This guide will walk you through the process step-by-step, from gathering materials to mounting your finished nightstand.

Step 1: Gathering Your Materials Before you begin, ensure you have all the necessary materials and tools. This will streamline the building process and prevent frustrating interruptions.

Wood (Pine, Oak, or Plywood recommended, depending on desired look and budget):

• One piece for the top/bottom: e.g., 18" x 12"
• Two pieces for the sides: e.g., 6" x 12"
• One piece for the back: e.g., 18" x 6"
• Wood for drawer front: e.g., 18" x 6"
• Wood for drawer sides (2x): e.g., 10" x 4"
• Wood for drawer back: e.g., 16" x 4"
• Wood for drawer bottom (plywood): e.g., 16" x 10"

Wood glue

Screws (1 1/4" wood screws)

Drawer slides (full extension recommended)

Sandpaper (various grits, e.g., 120, 220)

Wood stain or paint (optional)

Polyurethane or sealant (optional)

Mounting hardware (heavy-duty floating shelf brackets)

Wood filler (if needed)

Drawer pull or knob

Safety glasses

Dust mask

Step 2: Tools Required Having the right tools is crucial for a successful DIY project. Make sure you have these on hand.

Circular saw or table saw

Drill with drill bits

Screwdriver

Measuring tape

Pencil

Clamps

Sander (optional, but recommended)

Level

Stud finder

Step 3: Cutting the Wood Carefully measure and cut all wood pieces according to your desired dimensions. Accuracy at this stage is important for a clean, professional look.

Use the circular saw or table saw to cut the top, bottom, sides, and back pieces for the nightstand.

Cut the drawer front, sides, back, and bottom according to your desired drawer size, ensuring it fits smoothly within the nightstand frame.

Double-check all measurements before cutting to avoid errors.

Step 4: Assembling the Nightstand Frame Begin assembling the main structure of the nightstand.

Apply wood glue to the edges where the sides meet the top and bottom pieces.

Use clamps to hold the pieces together while you pre-drill pilot holes to prevent the wood from splitting.

Secure the joints with screws.

Attach the back piece to the assembled frame using glue and screws. This will add stability to the structure.

Ensure all corners are square using a square tool.

Step 5: Building the Drawer Constructing the drawer involves creating a box that fits snugly within the nightstand frame.

Apply wood glue to the edges of the drawer sides, back, and front pieces.

Clamp the pieces together and pre-drill pilot holes before securing with screws.

Attach the drawer bottom to the drawer box using glue and screws.

Ensure the drawer is square and the dimensions allow it to slide easily into the nightstand frame.

Step 6: Installing Drawer Slides Accurate installation of drawer slides is crucial for smooth operation.

Attach one part of the drawer slides to the inside of the nightstand frame, ensuring they are level and aligned.

Attach the other part of the drawer slides to the sides of the drawer.

Follow the manufacturer's instructions for proper alignment and spacing.

Test the drawer to ensure it slides smoothly and fully extends.

Step 7: Sanding and Finishing Prepare the wood surface for staining or painting.

Use sandpaper (starting with 120 grit and progressing to 220 grit) to smooth all surfaces of the nightstand and drawer.

Pay attention to edges and corners to round them slightly.

Wipe away all dust with a clean cloth.

If desired, apply wood filler to any imperfections or screw holes and sand smooth after it dries.

Step 8: Staining or Painting (Optional) Enhance the appearance of your nightstand.

Apply a wood stain or paint of your choice, following the manufacturer's instructions.

Apply multiple thin coats for best results, allowing each coat to dry completely before applying the next.

If using stain, consider applying a clear coat of polyurethane or sealant to protect the wood and enhance its durability.

Step 9: Attaching the Drawer Pull/Knob Add a decorative and functional element to the drawer.

Drill a hole in the center of the drawer front, if necessary, according to the specifications of your chosen drawer pull or knob.

Attach the drawer pull or knob using the provided hardware.

Step 10: Installing the Mounting Hardware Prepare for mounting the nightstand to the wall.

Attach the heavy-duty floating shelf brackets to the inside back of the nightstand. Make sure to use appropriate screws that will hold the weight.

Consult the mounting hardware instructions for proper placement and spacing.

Ensure the brackets are securely attached to the nightstand frame.

Step 11: Mounting the Nightstand to the Wall The final step is to securely mount your nightstand.

Use a stud finder to locate wall studs in the desired location.

Mark the stud locations.

Hold the nightstand against the wall at the desired height.

Using a level, ensure the nightstand is perfectly level.

Secure the mounting brackets to the wall studs using appropriate screws.

Double-check that the nightstand is securely mounted and can support weight.

Conclusion: Enjoy Your New Floating Nightstand Congratulations! You have successfully built and installed your own floating nightstand with a drawer. Enjoy the added functionality and modern aesthetic it brings to your bedroom. Remember to periodically check the mounting hardware to ensure it remains secure.

Floating Nightstand,drawer Nightstand,wall Nightstand,free Shipping

www.etsy.com

Wooden Floating Nightstand Wall Mounted Nightstand With Drawer Bedside Shelf Nightstand For

www.artofit.org

Floating Nightstand With Wooden Drawer In Oak. Mid Century

www.etsy.com

Related Posts by Categories